The Tempra™ continually heats water instantaneously as you require it - and only when you require it. The Tempra™ unit completely replaces a conventional tank heater with no disruption to your comfort and hot water needs.
Recommended Use
- For homes with high demand for hot water using one to two major applications at the same time
- To quickly fill large tubs: Roman tubs, garden tubs, jacuzzi, etc
- For homes in the Northern part of the country with colder weather
| Temperature Rise Chart (° Fahrenheit) | Flow Rate | 1.0 GPM | 1.5 GPM | 2.0 GPM | 2.5 GPM | 3.0 GPM | 3.5 GPM | 4.0 GPM | Temp Rise | 164° | 109° | 82° | 66° | 55° | 47° | 41° |
|
|
Notes: GPM - Gallons per minute. Degrees (°) Fahrenheit. Values are approximate. |
| |
| Electrical Requirements |
Breakers & Wire | Max kW @ 208V / 240V | Volts | Max AMP @ 208V / 240V | 2 x 60 / 2 x 6 AWG
(2-1 type, 2 hots + ground) | 18 kW / 24 kW | 208V / 240V | 88 / 100 |
|
Notes: Ratings above using standard 240 Volts. Higher voltage will increase power, just as lower voltage will have the reverse effect. When installing, check specifications on unit used. Voltage, amperage, breaker and wire size may vary depending on local electrical standards. Consult your local professional for guidance. |
| |
Technical Specifications (Specs) | |
 Brochure/Specifications Sheet
Installation Manual
Dimensions: 16 5/8"W x 14 1/2"H x 4 5/8"D
Weight: 15.4 Lbs
Water Connections: 3/4" NPT
Working Pressure: 150 PSI
Tested to Pressure: 300 PSI
Voltage: 208 / 240
Min. Flow Rate (Activation): 0.58 GPM
Manufacturer's Warranty: 3 Years
|
|
|
| |
