New! for 2019. Industry leading warranty, increased heating capacity, still affordably priced
The DHC-E line of tankless water heaters continually heat water instantaneously as you require it - and only when you require it. These units are ideal for point of use applications, and the larger models may provide general household hot water for southern or tropical climates. As with all our tankless water heaters, this units will not run out of hot water.
Recommended Use
- For point of use applications
- Kitchen sinks
- Lavatories
- For homes with Southern or Tropical climate
| Temperature Rise Chart (° Fahrenheit) | Flow Rate | 1.0GPM | 1.5 GPM | 2.0 GPM | 2.5 GPM | 3.0 GPM | 3.5 GPM | 4.0 GPM | Temp Rise | 82° | 55° | 41° | 33° | 27° | 23° | 20° |
|
|
Notes: GPM - Gallons per minute. Degrees (°) Fahrenheit. Values are approximate. |
| |
| Electrical Requirements |
| | Breakers | Wire
(2-1 type, 2 hots + ground) | Max kW | Max AMP | | 240v | 50 amp | 8 AWG | 12 kW | 50 | | 208v | 50 amp | 8 AWG | 9 kW | 44 |
|
Notes: Ratings above using standard 240 Volts. Higher voltage will increase power, just as lower voltage will have the reverse effect. When installing, check specifications on unit used. Voltage, amperage, breaker and wire size may vary depending on local electrical standards. Consult your local professional for guidance. |
| |
Technical Specifications (Specs) |  Brochure/Specifications Sheet
Installation Manual
Dimensions: 7.875"W x 14.19"H x 4.125"D
Weight: 5.9 Lbs
Water Connections: 1/2" NPT
Working Water Pressure: 150 psi
Tested to Water Pressure: 300 psi
Voltage: 208 / 240
Min. Flow Rate (Activation): 0.29 GPM
Manufacturer's Warranty: 3 Years
|
|
| |
